Bearing Ring Eddy Current Flaw Detector

Ring feeding · Flaw detection · Part turnover · Flaw detection

Discuss your project ↗

Equipment features

Modular design for model changeover
Network interface for data collection and remote service

Detailed process flow

Outer-ring process

01Component feeding
02Flaw station 1 — raceway
03Flaw station 2 — end face and bore
04Part turnover
05Flaw station 3 — end face and outside diameter↳ NG rejection
06Discharge

Inner-ring process

01Component feeding
02Flaw station 1 — raceway
03Flaw station 2 — end face and bore
04Part turnover
05Flaw station 3 — end face and outside diameter↳ NG rejection
06Discharge

Process sequence depends on the bearing and selected configuration. Inspection and optional stations are agreed during technical review.

Reference configurations

Technical specifications

Technical parameter	26–62 mm
Processing range	26mm-62mm
Cycle time	≤5 s
Reference crack (L × W × D)	3mm × 0.1mm × 0.1mm
False judgement rate	≤2%

Reference values from the supplied catalog. Confirm the applicable bearing dimension, component specification and operating conditions with our team. Final specifications are agreed for each quotation.

JIANRONG / ENGINEERING

Start with your bearing.

Send bearing designations and component drawings, target output, inspection requirements and the installation country. We will review the process and discuss a suitable configuration.

Discuss your project ↗

derekyang1225@gmail.com